Sharp UX-B30 manual Receiving Faxes, Using TEL/FAX Mode

all.book Page 57 Tuesday, June 1, 2004 4:24 PM

3. Receiving Faxes

Using TEL/FAX Mode

To select TEL/FAX mode,
AUFLÖS./	AUFLÖS./	TEL FAX
EMPFANG	EMPFANG
	until the
press
arrow in the display		TEL/FAX AB
points to TEL/FAX.

When the reception mode is set to TEL/FAX, your fax machine automatically answers all calls on two rings (the number of rings can be changed as explained on page 59). After answering, your fax monitors the line for about five seconds to see if a fax tone is being sent.

♦If your fax machine detects a fax tone (this means that the call is an automatically dialled fax), it will automatically begin reception of the incoming document.

♦If your fax machine doesn't detect a fax tone (this means that the call is a voice call or manually dialled fax), it will make a ringing sound (called pseudo ringing) for 15 seconds to alert you to answer (the duration of pseudo ringing can be changed as explained on the following page). If you don't answer within this time, your fax will send a fax tone to the other machine to allow the calling party to send a fax manually if they desire.

Note: Only the fax will alert you to voice calls or manually dialled faxes by pseudo ringing. An extension phone connected to the same line will not ring after the connection has been established.

Receiving	Faxes
3.

57