all.book Page 91 Tuesday, June 1, 2004 4:24 PM

7 Close the operation panel, pressing down firmly to make sure it clicks into place.

Maintenance

8. Maintenance

Cleaning the paper feed roller

A dirty paper feed roller will prevent the paper from feeding correctly. To clean the roller, first remove the paper tray. The roller will be visible in the opening in the rear of the machine. Hold the roller by pressing down on the white part with your finger and wipe the black part with a clean, dry cloth. Rotate the roller as needed to wipe the entire surface of the black part.

If you find it difficult to remove dirt from the roller, moisten the cloth with water and then wring it out thoroughly before wiping. Do not use alcohol, benzene, thinner, or other solvents.

Wipe here

Cleaning the housing

Wipe the external parts and surface of the machine with a dry cloth.

Caution!

Do not use benzene or thinner. These solvents may damage or discolor the machine.

91

Page 95
Image 95
Sharp UX-B30 manual Cleaning the paper feed roller, Cleaning the housing