Sharp UX-BS60 operation manual When this has happened, press

Models: UX-BS60

1 140
Download 140 pages 12.18 Kb
Page 20
Image 20

Installing the Print Cartridge

5 Make sure the cartridge holder has moved slightly away from the right side of the compartment, and then pull the green lever and open the cartridge holder cover.

If you are replacing the cartridge, remove the old cartridge. If you are going to use the old cartridge again, place it in an air-tight container.

CAUTION! DO NOT touch the contact area inside the cartridge holder, or pull on the cable that is connected to the cartridge holder.

Note: If the print compartment cover is left open for approximately 30 minutes with a cartridge installed, the cartridge will automatically return to its home position. To make the cartridge return to the cartridge replacement position

INK

when this has happened, press .

Cable

Gold contact area

6

7

Insert the new print cartridge into the cartridge holder.

Place your index finger on the tab as shown and close the cartridge holder cover with your thumb. Make sure the cover clicks into place.

18

Page 20
Image 20
Sharp UX-BS60 operation manual When this has happened, press