Sharp UX-BS60 Flash Select Setting for PBX, Press Once and 3 times, Press once and 5 times

Flash Select Setting for PBX

Flash Select Setting for PBX

Note: This setting is normally only used in Germany. In other countries, you can try changing the setting if you encounter difficulty with the default setting.

If your fax machine is connected to a PBX and the PBX uses the “Flash” method to connect to an outside line, you must select the appropriate Flash Select setting depending on whether your PBX line is a normal telephone line or a high-speed line.

1 Press

once and 3 times.

Display:

OPTION SETTING

2 Press once and 5 times.

FLASH SELECT

3 Press once.

FLASH SELECT 1: SHORT TIME

4 Select (SHORT TIME) if your PBX line is a normal telephone line.

Select (LONG TIME) if your PBX line is a high-speed line.

The display briefly shows your selection, then:

FAX SIGNAL RX

5 Press to return to the date and time display.

30