Industry Sector, IA&DT
The button should be operable only in manual mode.
Under Animations, select the Control enable.
Set the check mark at Enabled.
Select “H3_MAN” as tag from the symbols.
Set the state to Enabled.
Under Type, select Bit with bit position 0.
To make the color change visible, change the foreground color to white and the background color to blue under Appearance.
Test the function of the button in manual and automatic mode.
SCE Training Curriculum | Page 85 of 118 | To be used only at Educational and R&D Facilities |
TIA Portal Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |
