Siemens 090-010 manual Under Animations, select the Control enable

Industry Sector, IA&DT

The button should be operable only in manual mode.

In other words, it should only be possible to operate the button if the tag “H3_MAN” has the value 1.

Open the Animation tab.

Under Display, select Add new animation.

Under Animations, select the Control enable.

Select "H3_MAN" as tag from the PLC tags.

Under Control enable, set the status to Enabled.

For Single bit, select the bit position 0.

Create a new animation appearance.

The button should change color in manual mode; i.e. when the tag “H3_MAN” has the value 1. To make the color change visible, change the foreground color to white and the background color to blue under Appearance.

SCE Training Curriculum	Page 70 of 118	To be used only at Educational and R&D Facilities
TIA Portal Module 090-010, Edition 03/2013		Unrestricted / © Siemens AG 2013. All Rights Reserved

SCE_EN_090-010_R1209_ WinCC Advanced with Runtime and TP700 Comfort Panel