About these Operating Instructions

These Operating Instructions describe the use of the optiset E standard, optiset E ad- vance, optiset E advance plus und optiset E advance conference telephones in conjunction with the HiPath 4000 Communication Server, Version 1.0 and Hicom 300 E/300 H, all Ver- sions.

How to use these Operating Instructions

Step by Step

 

Q

 

W

 

S

 

or

Service Menu

 

Speaker

 

Executive

 

Consultation?

 

Ringer pitch?

 

Displays

 

Callback?

 

Please dial?

>

The operating procedures are presented in a logical sequence in the "coloured" column. The symbols used have the following meanings:

Lift the handset.

Replace the handset.

Enter number or code.

Press the setting keys on the telephone.

Press the key.

Press the key which is lit.

Press the key which is flashing.

The selection option is shown on the display.

Confirm with key .

Look for the selection option.

Press keys until the selection option appears on the display.

Then confirm with key .

Line 1 contains instructions or acknowledgement messages, depending on the particular situation.

Line 2 contains selection options for functions,

which you can confirm by means of . If the character ">" is visible on the right-hand side, there are further selection options, which can then be

accessed using .

2

Page 2
Image 2
Siemens 300 H operating instructions About these Operating Instructions, How to use these Operating Instructions, Displays