Safety Guidelines: Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment. These warning notices are accompanied by a clarification of the level of caution to be observed.
Qualified Personnel: This device/system may only be set up and operated in conjunction with this manual. Qualified personnel are only authorized to install and operate this equipment in accordance with established safety practices and standards.
Unit Repair and Excluded Liability:
•The user is responsible for all changes and repairs made to the device by the user or the user’s agent.
•All new components are to be provided by Siemens Milltronics Process Instruments Inc.
•Restrict repair to faulty components only.
•Do not reuse faulty components.
Warning: This product can only function properly and safely if it is correctly transported, stored, installed, set up, operated, and maintained.
Note: Always use product in accordance with specifications.
Copyright Siemens Milltronics Process | Disclaimer of Liability |
Instruments Inc. 2005. All Rights Reserved |
|
This document is available in bound version and in | While we have verified the contents of this |
electronic version. We encourage users to purchase | manual for agreement with the |
authorized bound manuals, or to view electronic versions | instrumentation described, variations |
as designed and authored by Siemens Milltronics Process | remain possible. Thus we cannot |
Instruments Inc. Siemens Milltronics Process Instruments | guarantee full agreement. The contents of |
Inc. will not be responsible for the contents of partial or | this manual are regularly reviewed and |
whole reproductions of either bound or electronic | corrections are included in subsequent |
versions. | editions. We welcome all suggestions for |
| improvement. |
| Technical data subject to change. |
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments Inc.
Contact SMPI Technical Publications at the following address:
Technical Publications
Siemens Milltronics Process Instruments Inc. 1954 Technology Drive, P.O. Box 4225 Peterborough, Ontario, Canada, K9J 7B1 Email: techpubs.smpi@siemens.com
•For a selection of Siemens Milltronics level measurement manuals, go to:
www.siemens.com/processautomation. Under Process Instrumentation, select Level Measurement and then go to the manual archive listed under the product family.
•For a selection of Siemens Milltronics weighing manuals, go to:
www.siemens.com/processautomation. Under Weighing Technology, select Continuous Weighing Systems and then go to the manual archive listed under the product family.
© Siemens Milltronics Process Instruments Inc. 2005
