Singer MODEL 9920 Elongation, Sewing the Selected Pattern, Tips, To recall the selected pattern

c.Elongation

By pressing the elongation button (most right function button), stitch will elongate as below. c-1. Regular length

c-2. Double length

c-3. Triple length c-4.4X length c-5.5X length

If mark is not indicated, the pattern cannot elongate.

d.Setting the stitch width and length Machine wil pre-set the stitch width and length

suitable for the pattern. You can change them as follows.

Press the most left function button at the setting mode. The pre-set stitch width and length are indictated in highlight.

For narrower width, press function button (d-l). For wider width, press function button (d-2). For shorter length, press function button (d-3). For longer length, press function button (d-4). Press the most left function button to close it.

Note:

Letter stitches cannot change the stitch width and length,

e.After you have complete settings, Press the setting button again.

G.SEWING THE SELECTED PATTERN

1.Attach the satin foot when sewing decorative & letter stitch.

2.Lower the presser foot and start sewing.

3.Machine will indicate the sewing pattern on the LCD.

_m

j_ E:EDE:DL

%_&&& _6666

ebhmA IJi

O _ O O O	c_
@@@@@	@

H.TIPS

a. To sew selected patterns from beginning.

When you stop sewing at the middle of patterns, you may want to restart selected patterns.

In such case, press the decorative & letter stitch button.

b. To recall the selected pattern.

If you change the pattern to utility stitch, machine will retain the selected patterns.

To recall these patterns, press the decorative & letter stitch button and press the setting button. Machine will recall the selected patterns.

iiiiiiiiiiiiiiiiiiiii

I_r,,,,,_ fl _o _ o _i

_iiiiiiiiiiiiiiiiiiiiii

i_iiiiii_i _ iiii!ii!ii

H

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

76