Singer MODEL 9920 instruction manual Buttonhole

BUTTONHOLE	SEWlNGm	_62 63 ....e_	6_	66	67
Th,s machine can sew 8 type buttonholes.		_ _ - - _ _	_
62. Bar-tack Butonhole (Narrow)for light to				68	69
medium weight	fabrics	_"---J	I

63.Bar-tack Buttonhole (Wide) for large buttons _

64.Keyhole Buttonhole for heavy weight fabrics __--_-.._l_l

65.Keyhole Buttonhole with reinforced bar tack

66. Tapered Keyhole Buttonhole L_________.._2 P-------4 I

67.Round Ended Buttonhole (Narrow) for light to medium weight fabrics

68.	Round	Ended	Buttonhole	(Wide) for	large	i
	buttons
69.	Round	Ended	Buttonhole	with cross	bar

Buttonhole Foot (with under plate)

Note:

Density of buttonhole legs may be adjusted with stitch length control.

1.Mark position and length of buttonhole on fabric.

2.Set button on the base.

If button does not fit on the base, adjust slide on base to diameter of button plus thickness of button.

a = Length of button + thickness

3.Pass upper thread through the hole of

buttonhole foot and bring upper and bobbin threads to the left.

4.Position fabric under presser foot so that the center line mark is in the center of the

buttonhole foot. Lower the foot.

Note:

When sewing stretch fabrics, it is suggested that you use interfacing on the backside of the fabric.

5. Lower the buttonhole lever completely.

Note:

Machine will not start to sew if buttonhole lever is

not lowered properly or buttonhole foot is not positioned correctly.

6. Hold upper thread lightly and start the machine.

6O