MAC Spoofing
This is an optional configuration that may or may not be required by your cable operator. For more information about MAC Clone/Spoofing please contact your cable operator to determine if this is a required setting.
To access the MAC Spoofing configuration page, on the Side Navigation bar, click on [WAN] link and then click on the [MAC Spoofing] link.
LAN
From this section you can configure the following settings:
•The PUBLIC LAN IP settings, including IP Address, Subnet Mask, and Domain Name – this option can also be enabled to act as the WAN IP.
•The PRIVATE LAN IP settings, including IP Address, Subnet Mask, and Domain Name.
•Enable or Disable the integrated DHCP server
•Configure the DHCP Lease time for your DHCP clients
•The IP Address Pool range for DHCP clients
•The PPTP IP Address Pool for PPTP VPN clients
To access the LAN configuration page, on the Side Navigation bar, click on [LAN] link.
LAN IP
Use the LAN section to configure the LAN IP address for the Gateway and to enable the DHCP server for dynamic client address allocation. You can also configure the Lease Time for the DHCP clients on your network.
Public LAN IP Settings
Define a range of public IPs that are used on the LAN. The combination of IP address and Subnet Mask settings determine the Public LAN subnet and IP addresses within this network are assigned to servers on the LAN. Optionally, the Public LAN IP address can be used as the Gateway’s WAN IP address.
