9. The [Status] should now be [Phase 2 Completed].
Create a PPTP VPN Tunnel
To enable and configure a PPTP server on the Gateway, follow the steps below. Note that remote PPTP clients that connect into the Gateway will be assigned IP addresses from the PPTP IP Address Pool on the LAN Settings page for their PPTP WAN interface.
1.On the Side Navigation bar, click on the [VPN] link
2.On the VPN settings page, deselect the [Disable PPTP VPN Functions] option
3.Click the [Apply] button to save your changes
4.On the Side Navigation bar, click on the [PPTP/L2TP Configuration] link
5. Under the [PPTP/L2TP User Table] click the [Add] button.
