
CHAPTER 1 Introduction
Hardware Description
LED INDICATORS The Mini 3G Broadband Router includes four status LED indicators, as described in the following figure and table.
Figure 3: LEDs
WPS SET
WLAN LAN 3G USB WAN Power
| WLAN | LAN | 3G USB WAN | Power |
Table 2: LED Behavior |
|
|
| |
|
|
|
|
|
LED | Status |
| Description |
|
|
|
|
| |
Power | On Blue |
| The unit is receiving power and is operating normally. | |
| Off |
| There is no power currently being supplied to the | |
|
|
| unit. |
|
WLAN | On/Blinking Blue | The 802.11n radio is enabled and | ||
|
|
| transmitting or receiving data through wireless links. | |
| Off |
| The 802.11n radio is disabled. | |
WAN | On Blue |
| The Ethernet WAN port is aquiring an IP address. | |
| Blinking |
| The Ethernet WAN port is connected and is | |
|
|
| transmitting/receiving data. | |
| Off |
| The Ethernet WAN port is disconnected or has | |
|
|
| malfunctioned. |
|
LAN | On Blue |
| The Ethernet LAN port is connected to a PC or server. | |
| Blinking |
| The Ethernet port is connected and is transmitting or | |
|
|
| receiving data. |
|
| Off |
| The Ethernet port is disconnected or has | |
|
|
| malfunctioned. |
|
3G USB | On Blue |
| A 3G connection has been established. | |
| Slow Blinking |
| A 3G connection is in progress. | |
| Fast Blinking |
| The wrong 3G PIN code has been entered, or the 3G | |
|
|
| budget limit has been reached. | |
| 5 Blinks Cycle | The 3G | ||
| Off |
| There is no modem connected to the 3G USB port, or | |
|
|
| the device has failed. |
|
|
|
|
|
|
– 24 –