SMC Networks SMCWBR11S-3GN manual IC Statement, IC Radiation Exposure Statement

COMPLIANCES

The following three 3G cards have passed the co-located EMC/RF exposure test with this device and can be used with this device. Other 3G cards may or may not comply with FCC rules, please consult the manufacturer before purchase.

Interface	Brand	Product	Model	FCC ID	NCC ID
		Name
USB Port	Huawei	HSDPA USB	E169	QISE169	CCAD083G0060T5
		Stick
	ZTE	HSDPA USB	MF626	Q78-ZTEMF622	N/A
		Modem
	Huawei	HSDPA USB	E220	QISE220	N/A
		Modem

IC STATEMENT

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate with an antenna having a maximum gain of 2.35 dBi. Antennas having a higher gain are strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication.

IMPORTANT NOTE:

IC RADIATION EXPOSURE STATEMENT:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

AUSTRALIA/NEW ZEALAND AS/NZS 4268

ACN 066 352010

– 6 –