CHAPTER 4 Initial Configuration
Setup Wizard
STEP 2 - TIME The Step 2 page of the Wizard configures time zone and SNTP settings.
SETTINGS
Select a time zone according to where the device is operated. Click Next after completing the setup.
Figure 15: Wizard Step 2 - Time and SNTP Settings
STEP 3 - WAN
SETTINGS - DHCP
The following items are displayed on this page:
◆Current Time — Receives a time and date stamp from an SNTP server.
◆Sync with host — Updates the unit's time from the web management PC's system time.
◆Time Zone — Select the time zone that is applicable to your region.
◆SNTP Server — Enter the address of an SNTP server to receive time updates.
◆SNTP synchronization (hours) — Specify the interval between SNTP server updates.
The Step 3 page of the Wizard specifies the Internet connection parameters for the Mini 3G Broadband Router’s WAN port. Click Next after completing the setup.
By default, the WAN port is configured with DHCP enabled. The options are Static IP, DHCP (cable modem), PPPoE (DSL modem), PPTP, and L2TP. Each option changes the parameters that are displayed on the page.
You can also enable support for a USB 3G modem as a WAN connection, either as a primary (Master) link, or as a backup to the WAN port link.
– 37 –
