SMC Networks SMCWBR11S-3GN manual PPPoE Configuration

CHAPTER 6 Network Settings

WAN Setting

PPPOE Enables the Mini 3G Broadband Router IP address to be assigned automatically from an Internet service provider (ISP) through a DSL modem using Point-to-Point Protocol over Ethernet (PPPoE).

Figure 28: PPPoE Configuration

The following items are displayed on this page:

◆PPPoE User Name — Sets the PPPoE user name for the WAN port. (Default: pppoe_user; Range: 1~32 characters)

◆PPPoE Password — Sets a PPPoE password for the WAN port. (Default: pppoe_password; Range: 1~32 characters)

◆Verify Password — Prompts you to re-enter your chosen password.

◆Operation Mode — Selects the operation mode as Keep Alive, On Demand or Manual. (Default: Keep Alive)

■Keep Alive Mode: The Mini 3G Broadband Router will periodically check your Internet connection and automatically re-establish your connection when disconnected. (Default: 60 seconds)

■On Demand Mode: The maximum length of inactive time the unit will stay connected to the DSL service provider before disconnecting. (Default: 5 minutes)

– 58 –