CHAPTER 3 Installing the Mini 3G Router

Router Mode Connections

ROUTER MODE CONNECTIONS

In its default Router Mode, the Mini 3G Broadband Router forwards traffic between an Internet connected cable or DSL modem, and wired or wireless PCs or notebooks. The basic connections are illustrated in the figure below.

Figure 10: Router Mode Connection

4. Set up wireless devices

Notebook PC

1. Connect WAN port to cable/DSL modem

Internet

3.Connect AC power adapter to power source

Cable/DSL Modem

2.Connectto PC LAN port

To connect the Mini 3G Broadband Router in Router Mode for use as an

Internet gateway, follow these steps:

1.Connect an Ethernet cable from the Mini 3G Broadband Router’s WAN port to your Internet connected cable or DSL modem.

2.Connect an Ethernet cable from the Mini 3G Broadband Router’s LAN port to your PC. Alternatively, you can connect to a workgroup switch to support more wired users. The Mini 3G Broadband Router can support up to 253 wired and wireless users.

3.Power on the Mini 3G Broadband Router by connecting the AC power adapter and plugging it into a power source.

CAUTION: Use ONLY the power adapter supplied with the Mini 3G Broadband

Router. Otherwise, the product may be damaged.

When you power on the Mini 3G Broadband Router, verify that the Power LED turns on and that the other LED indicators start functioning as described under see “LED Indicators” on page 24.

4.Set up wireless devices by pressing the WPS button on the Mini 3G Broadband Router or by using the web interface. See “Initial Configuration” on page 34 for more information on accessing the web interface.

– 31 –

Page 31
Image 31
SMC Networks SMCWBR11S-3GN manual Router Mode Connections