SMC Networks SMCWBR11S-3GN manual 3G Configuration E-mail Settings

CHAPTER 6 Network Settings

WAN Setting

◆Budget Policy — Specifies the action to take when budget limits have been reached.

■Action if Over Budget — Specifies the the action to take when a budget limit has been exceeded:

■

■

Drop Current Connection — Immediately drop the current connection. (Default: Enabled)

Disallow New Connection — Do not permit any new connections. (Default: Enabled)

■Trigger by Limit Budget — Specifies the percentage of the time or data budget at which to start sending E-mail alerts at the indicated time interval. When E-mail alerts are enabled, be sure to configure the E-mail settings. (Default: 90% of budget, E-mail Alerts disabled, recurring every 10 minutes)

◆Budget Counter — Select the day of the month on which to reset the time/data budget counters. (Default: 1st day per month)

Figure 34: 3G Configuration - E-mail Settings

The following items are displayed in this section on this page:

◆E-mail Settings — The unit can use SMTP (Simple Mail Transfer Protocol) to send E-mail messages when triggered by the specified budget policy limits.

■

■

■

■

■

Mail SMTP Authentication — Specifies a user name and password for SMTP server authentication. (Options: PLAIN, LOGIN, or Disabled.)

User Name — Enter the user name for the SMTP server account.

Password — Enter the password for the SMTP server account.

Mail Server — Specifies the URL of the SMTP mail server that will send the alert messages.

Mail Sender — Specifies an E-mail address on the SMTP server that will send the alert messages.

– 65 –