SMC Networks SMCWBR11S-3GN manual Settings Pppoe, Wizard WAN Settings PPPoE

CHAPTER 4 Initial Configuration

Setup Wizard

STEP 3 - WAN

SETTINGS - PPPOE

◆Default Gateway — The IP address of the gateway router for the Mini 3G Broadband Router, which is used if the requested destination address is not on the local subnet.

◆Primary DNS Server — The IP address of the Primary Domain Name Server. A DNS maps numerical IP addresses to domain names and can be used to identify network hosts by familiar names instead of the IP addresses. To specify a DNS server, type the IP addresses in the text field provided. Otherwise, leave the text field blank.

◆Secondary DNS Server — The IP address of the Secondary Domain Name Server.

Enable the Mini 3G Broadband Router IP address to be assigned automatically from an Internet service provider (ISP) through a DSL modem using Point-to-Point Protocol over Ethernet (PPPoE).

Figure 18: Wizard Step 3 - WAN Settings - PPPoE

The following items are displayed on this page:

◆Ethernet Port — Select “PPPoE (ADSL)” for the WAN port connection from the drop-down list.

■Enable MAC Clone — Some ISPs limit Internet connections to a specified MAC address. This setting allows you to manually change the MAC address of the Mini 3G Broadband Router's WAN interface to match the PC's MAC address provided to your ISP for registration. You can enter the registered MAC address manually by typing it in the boxes provided. Otherwise, connect only the PC with the registered MAC address to the Mini 3G Broadband Router, then click the “Clone your PC’s MAC Address.” (Default: Disable)

– 40 –