CHAPTER 6 Network Settings
WAN Setting
L2TP Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual private networks. The service is provided in many European countries.
Figure 30: L2TP Configuration
The following items are displayed on this page:
◆Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)
◆User Name — Sets the L2TP user name for the WAN port. (Default: l2tp_user; Range: 1~32 characters)
◆Password — Sets a L2TP password for the WAN port. (Default: l2tp_password; Range: 1~32 characters)
◆Verify Password — Prompts you to
◆Address Mode — Sets a L2TP network mode. (Default: Dynamic)
◆IP Address — Sets the static IP address. (Default: 0.0.0.0, available when L2TP Network Mode is set to static IP.)
◆Subnet Mask — Sets the static IP subnet mask. (Default: 255.255.255.0, available when L2TP Network Mode is set to static IP.)
– 61 –
