Niagara 4100 User Guide
Configuring default directory setting
The Niagara 4100 stores AV files when you select the Save to File option in the Output tab of the encoder profile in the Default AV Folder field (Figure 123). Refer to the Save to File option under the Flash Encoder Properties sections for information on setting an encoder profile to create an AV file.
Note: ViewCast strongly recommends you do not alter the default directory setting unless you understand
the risk of saving your files to a directory not located on drive D. If you save your files to another drive on the Niagara 4100, the system could delete the files when you use the Restore to Niagara 4100 Factory Defaults feature.
Only drive D on the Niagara 4100 has available storage to save your files. Check the drive properties for available free space to determine your storage capacity.
Use drives C, E, and F strictly for the Niagara 4100 operational programs. Any modifications to these drives can permanently damage your system and void your warranty.
Figure 123. Default AV Folder field
ViewCast | 103 |
