Advanced Operations
Starting an encoder group
To start an encoder group, click the Start link to the right in the Start column of the group you want to start. The encoder group will start in a few seconds. The system displays any errors on the Starting window while the group starts.
Note: With each encoder started, more system resources (CPU cycles) are consumed. It is recommended that the total CPU threshold not exceed an average of 70 %. Refer to the Checking CPU usage section in Basic Operations.
Stopping an encoder group
To stop an encoder group, click the Stop link to the right in the Stop column of the group you want to stop. The encoder group will stop in a few seconds. The system displays any errors on the Stopping window while the group stops.
86 | ViewCast |
