Advanced Operations
Editing an Adobe Flash H.264 encoder
When you create a new encoder, the Encoder Properties window appears. The Encoder Properties windows for editing a new encoder or an existing encoder are identical. You must configure the audio and video settings for each encoder type.
Use the Video, Audio, Output, and H.264 Presets tabs to edit the settings. Configure the video and audio settings, then the streaming properties. The streaming properties and advanced streaming settings are different for each type of encoder.
From the Flash Encoder Properties window (Figure 70), you can set the encoder to start streaming automatically by clicking the Auto Start checkbox. You can also start the encoder from this window by clicking the Start Flash Encoder link in the top right corner of the window.
Click Encoders All Encoders from the home page. Then select the Edit link next to the encoder whose properties you wish to modify. The system displays the Encoder Properties window for the selected encoder.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Submit. Otherwise, all your changes will be lost.
Figure 70. Flash Encoder Properties
58 | ViewCast |
