Install overview, Prerequisites, Package contents

Overview

Install overview

This section addresses the high-level actions you must perform to physically connect and set up your Niagara 4100 system.

You must complete the following primary tasks to install the Niagara 4100:

∙

Address and comply with all prerequisites.

Connect the Niagara 4100 streaming media appliance using its power source. Connect the video source (camera or video recorder) to the system.

Connect the Niagara 4100 to an IP network. Configure the Niagara 4100 system.

Before installing and connecting the Niagara 4100, ensure you comply with the following prerequisites:

∙All packaged items are undamaged and in working order.

∙Your environment meets all system requirements.

∙Safety instructions, notices, and warnings detailed in About This Guide including:

oRack Mount Safety Instructions

oFCC Notice

oEnvironmental Notices

oWarnings

Completely unpack all contents from the box and inspect each item for damage. Ensure that you have all the components listed below:

Appliance	∙	Niagara 4100
Power Cables	∙	One of the following:
		o North America power cable (110 vac)
		o International power cable (220 vac)
		o UK power cable (220 vac)
	∙ AC to DC converter
Guides	∙	Package insert (end-user license agreement, welcome letter,
		package content list)
	∙ User guide (on CD in PDF format)
	∙	Quick Start Guide
Software	∙	1 Niagara 4100 CD
Hardware	∙	Rugged carrying case

ViewCast