
Advanced Operations
5.Drag the sliders to adjust the Gamma, Brightness, Contrast, Hue, and Saturation (Figure 91).
Figure 91. Video filter settings
Note: Click Restore to the right of each filter to return the setting to the default.
6.Click the
∙None
–Performs no
∙Bob0
–Applies inverse telecine
–Applies motion adaptive
–Switches dynamically between the two modes as the content changes.
–Available for NTSC video only.
∙Bob1
–Drops the redundant fields and reassembles the video in a 24 fps progressive format.
–Applies inverse telecine
–Performs no
∙Advanced
–Is an algorithm for
–Applies motion adaptive interlacing to all video. It detects which portions of the image are still and which portions are in motion then applies different processing to each scenario.
Figure 92. De-Interlace Settings
Note: Telecine and inverse telecine only apply to NTSC video. They are not used for PAL and SECAM video. The system disables Bob0 and Bob1 choices when you select either PAL or SECAM as the video standard.
7.Click Submit.
78 | ViewCast |