SMC Networks SMCWBR11S-3GN manual MULTICAST-TO- Unicast Converter, Multicast-to-Unicast Converter

CHAPTER 7 Wireless Configuration

Advanced Settings

MULTICAST-TO- UNICAST CONVERTER

microseconds. Note that the CWMin value must be equal or less than the CWMax value.

◆CWMax (Maximum Contention Window) — The maximum upper limit of the random backoff wait time before wireless medium access can be attempted. The contention window is doubled after each detected collision up to the CWMax value. Specify the CWMax value in the range 0-15 microseconds. Note that the CWMax value must be greater or equal to the CWMin value.

◆Txop (Transmit Opportunity Limit) — The maximum time an AC transmit queue has access to the wireless medium. When an AC queue is granted a transmit opportunity, it can transmit data for a time up to the TxOpLimit. This data bursting greatly improves the efficiency for high data-rate traffic. Specify a value in the range 0-65535 microseconds.

◆ACM — The admission control mode for the access category. When enabled, clients are blocked from using the access category. (Default: Disabled)

◆AckPolicy — By default, all wireless data transmissions require the sender to wait for an acknowledgement from the receiver. WMM allows the acknowledgement wait time to be turned off for each Access Category (AC) 0-3. Although this increases data throughput, it can also result in a high number of errors when traffic levels are heavy. (Default: Acknowledge)

The Multicast-to-Unicast Converter section on the Wireless Settings Advanced page allows you to enable multicast traffic conversion.

Converting multicast traffic to unicast before sending to wireless clients allows a longer DTIM (Data Beacon Rate) interval to be set. A longer DTIM interval prevents clients in power-save mode having to activate their radios to receive the multicast data, which saves battery life.

Figure 43: Multicast-to-Unicast Converter

The following items are displayed in this section on this page:

◆Multicast-to-Unicast— Enables multicast traffic streams to be converted to unicast traffic before delivery to wireless clients. (Default: Disabled)

– 81 –