SMC Networks SMCWBR11S-3GN manual Wizard WAN Settings Pptp

CHAPTER 4 Initial Configuration

Setup Wizard

STEP 3 - WAN

SETTINGS - PPTP

◆USB Port — Enables support for a WAN connection using a USB 3G modem. For more information, see “Step 3 - WAN Settings - 3G” on page 45. (Default: Disabled)

◆User Name — Sets the PPPoE user name for the WAN port. (Default: pppoe_user; Range: 1~32 characters)

◆Password — Sets a PPPoE password for the WAN port. (Default: pppoe_password; Range: 1~32 characters)

◆Verify Password — Prompts you to re-enter your chosen password.

◆Operation Mode — Enables and configures the keep alive time and configures the on-demand idle time.

Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing virtual private networks. The service is provided in many European countries.

Figure 19: Wizard Step 3 - WAN Settings - PPTP

The following items are displayed on this page:

◆Ethernet Port — Select “PPTP” for the WAN port connection from the drop-down list.

■Enable MAC Clone — Some ISPs limit Internet connections to a specified MAC address. This setting allows you to manually change

– 41 –