CHAPTER 4 Initial Configuration
Setup Wizard
addresses. To specify a DNS server, type the IP addresses in the text field provided. Otherwise, leave the text field blank.
◆Secondary DNS Server — The IP address of the Secondary Domain Name Server.
STEP 3 - WAN Configures a static IP for the WAN port.
SETTINGS - STATIC IP
Figure 17: Wizard Step 3 - WAN Settings - Static IP
The following items are displayed on this page:
◆Ethernet Port — Select “Static (Fixed IP)” for the WAN port connection from the
■Enable MAC Clone — Some ISPs limit Internet connections to a specified MAC address. This setting allows you to manually change the MAC address of the Mini 3G Broadband Router's WAN interface to match the PC's MAC address provided to your ISP for registration. You can enter the registered MAC address manually by typing it in the boxes provided. Otherwise, connect only the PC with the registered MAC address to the Mini 3G Broadband Router, then click the “Clone your PC’s MAC Address.” (Default: Disable)
◆USB Port — Enables support for a WAN connection using a USB 3G modem. For more information, see “Step 3 - WAN Settings - 3G” on page 45. (Default: Disabled)
◆IP Address — The IP address of the Mini 3G Broadband Router. Valid IP addresses consist of four decimal numbers, 0 to 255, separated by periods.
◆Subnet Mask — The mask that identifies the host address bits used for routing to specific subnets.
– 39 –
