Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.
Press . or > repeatedly to set the day of the week.
Press ENTER or M.

4 Place the subwoofer.

To obtain a better bass reproduction, we recommend you to place the subwoofer on a solid floor where resonance is unlikely to occur.

Notes

•Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen.

•Always place the subwoofer vertically, keeping it a few centimeters away from the wall.

•If the subwoofer is placed in the center of a room, the bass could be extremely weakened. This is due to the influence of the standing wave of the room. If this happens, move the subwoofer away from the center of the room or eliminate the cause of the standing wave, by placing a bookshelf against the wall, etc.

Speaker settings

To enjoy DVDs, Super Audio CDs and other discs with multi-channel sound and Dolby surround effects, the speakers need to be adjusted. Set the distance from the listening position to the speakers, and the balance and level. Then use the test tone to adjust the volume of each speaker to the same level.

For details, see “Speaker settings” on page 35.

Setting the clock

1

2

3

4

5 Press . or > repeatedly to set the hour.

6 Press ENTER or M.

7 Press . or > repeatedly to set the minute.

8 Press ENTER.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET.

2Press . or > repeatedly to select “CLOCK SET?”, then press ENTER.

3Do the same procedures as step 3 to 8 above.

Note

The clock settings are cancelled when you disconnect the mains lead or if a power failure occurs.

12GB