To record using the Group Function
Press MD GROUP on the remote repeatedly until “GROUP ON” appears after step 2. Press GROUP SKIP on the remote repeatedly until “New Group” or the desired group appears after step 5.
To record only your favorite CD tracks
You can record only your favorite CD tracks using the Program Play. Between steps 2 and 3, perform steps 1 to 5 of “Creating your own program” (page 21).
Notes
•You cannot use this recording function with DVDs.
•The MD deck performs analog recording for VIDEO CDs, Super Audio CDs (except the CD layer) and discs with MP3 audio tracks. Also, when “T.Mark Lsync” is selected for Level Synchro Recording (page 47), more track marks may be marked than the actual number of tracks.
•You cannot pause the recording.
•If the MD play mode is set to the Repeat Play or Shuffle Play, the play mode switches to Normal Play in step 5.
•Playback with PBC function of VIDEO CD is automatically cancelled.
•The following items are either inoperative or cannot be used during recording a CD or CD layer part of Super Audio CD in
–The Auto Cut Function
–The Track Mark Function
•The tracks are recorded with a recording level of 0.0 dB regardless of the recording level value set in the Setup Menu.
Tips
•For details about LP2/LP4 recording, see “Recording for long times” on page 43.
•Depending on the disc,
Recording a tape on an
MD
—
You can make an analog recording of a tape on an MD. You can use TYPE I (normal) tape.
Use buttons on the MD deck for the operation.
1 Load a recordable MD.
2 Load a tape you want to record.
3 Press MODE repeatedly until “TAPEtMD SYNC” appears.
4 Press ENTER/START.
“Press START” flashes.
The MD deck stands by for recording and the tape deck pauses for play.
Tape playback side*
*When playing back both sides or the front side, N appears. When playing back the reverse side, n appears. To play the side opposite the display, move the TAPE lever to x, eject and
5 Press DIRECTION repeatedly until “g” appears to record on one side or “h” (or “j”) to record on both sides.
6 Press ENTER/START while “Press START” flashes.
Recording starts.
When the recording is completed, the tape deck and the MD deck stop automatically.
To stop recording
Move MD lever to x.
44GB