5 Start playing the desired source to record.

6 Press ENTER at the desired point to start recording.

To stop Time Machine Recording

Press x.

To record using the Group Function

Press MD GROUP repeatedly until “GROUP ON” appears after step 2. Press GROUP SKIP repeatedly until “New Group” or the desired group appears after step 4.

Notes

•You cannot record from a disc (DVD, CD, etc.) with this system to an MD using this recording function.

•The MD deck starts storing audio data when the deck stands by for recording in step 4 and you start playing the source. If less than 6 seconds have passed when you press ENTER, Time Machine Recording starts with less than 6 seconds of audio data.

Tip

For details about LP2/LP4 recording, see “Recording for long times” on page 43.

Marking track numbers

After recording

Use the Divide Function (page 59).

At any point during recording

— Track Mark

You can mark track numbers during manual recording of any source.

Press REC/REC IT on the MD deck during

MD

manual recording at the point you want to

–

add a track mark.

Recording

 

Presetting to automatically mark track numbers before recording

— Level-Synchro Recording

The Level Synchro Recording Function is factory set to on, so the track numbers are automatically marked. Track numbers are automatically marked when the input signal is continuously below a certain level for more than two seconds and then exceeds that level. If “L-SYNC” does not appear during recording, turn on the Level Synchro Recording as follows.

1 Press FUNCTION repeatedly to switch the function to MD.

2 Press MENU/NO.

3 Press . or > repeatedly until “Setup?” appears, then press ENTER.

4 Press . or > repeatedly until “T.Mark Off” (or “T.Mark LSync”) appears, then press ENTER.

5 Press . or > repeatedly until “T.Mark LSync” appears, then press

ENTER.

“L-SYNC” lights up.

continued

47GB