Notes

•If you use the recording timer and the Sleep Timer at the same time, the Sleep Timer has priority.

•The system turns on 30 seconds before the preset time. Do not operate the system from the time the system turns on until the play starts.

•If the system is on 30 seconds before the preset time, the recording timer will not be activated.

•The volume is reduced to minimum during recording.

•When you record on an MD, if recording timer is set with the Group Function on but no group is specified, the material is recorded into a new group.

•Note that if the recording timer is set at the same time as the Play Timer sound source is set to tape, the recording timer sound may be recorded onto the tape.

Tip

When you record from the radio, the station name (or the frequency when the station is not labelled

(page 64)) is recorded on an MD together with the start time and the stop time.

Display

Turning off the display

— Power Saving Mode

The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).

Press DISPLAY on the DVD player repeatedly while the system is off until the clock display disappears.

To cancel Power Saving Mode

Press DISPLAY on the DVD player while the system is off. Each time you press the button, the display switches cyclically as follows:

Clock display* t No display (Power Saving Mode)

* “– –:– –” appears if you have not set the clock.

Tip

The timer continues to operate in Power Saving Mode.

Display

75GB