Optional components

There is no sound.

•Refer to General item “There is no sound.” (page 87) and check the condition of the system.

•Connect the component properly (page 84) while checking:

–if the cords are connected properly.

–if the cord plugs are firmly inserted all the way.

•Turn on the connected component.

•Refer to the operating instructions supplied with the connected component and start playing.

•Check if proper function is selected.

The sound is distorted.

•Set the volume of the connected component lower.

•Press FUNCTION repeatedly until “VIDEO” appears, and press MENU/NO to select “SAT?”, then press ENTER.

If the system still does not operate properly after performing the above measures, reset the system as follows:

1Disconnect the mains lead.

2Reconnect the mains lead.

3Press ?/1 to turn on the system.

4Press SPEAKER OUT MODE and SOUND FIELD + on the DVD player and move SA-CD/DVD lever on the DVD player to x at the same time.

The system is reset to the factory settings except for DVD settings. You should set the settings you made, such as the preset stations, clock, and timer.

To return the DVD setup to the default settings*, perform reset as follows:

1Press DVD SETUP in stop mode.

2Press v or V repeatedly to select “RESET”, then press ENTER.

3Press v or V repeatedly to select “YES”, then press ENTER.

It takes a few seconds to complete. Do not press ?/1 when resetting the system.

* Except for Parental Control settings

Self-diagnosis display

This system has a Self-diagnosis display function to let you know if there is a system malfunction. The display shows a code made up of three or five letters and a message alternately to show you the problem. To solve the problem refer to the following list. If any problem persists, consult your nearest Sony dealer.

C11/Protected

The MD is protected against erasure.

cRemove the MD and slide the tab to close the slot (page 42).

C12/Cannot Copy

You tried to record a disc with a format that the system does not support, such as a CD-ROM.

cRemove the disc and turn off the system once, then turn it on again.

You tried to record sound that cannot be digitally recorded with this system from a connected optional component.

cSwitch the digital audio output of the optional component to PCM mode.

C13/REC Error

Recording could not be performed properly.

cMove the system to a stable place, and start recording over from the beginning.

The MD is dirty or scratched, or the MD does not meet the standards.

cReplace the MD and start recording over from the beginning.

C13/Read Error

The MD deck cannot read the disc information properly.

cRemove the MD once, then insert it again.

92GB