MD

Analog REC

The MD deck starts the analog recording.

Assign None

All the tracks on an MD are registered into groups.

Auto Cut

The MD deck is pausing the recording because silence continued for 30 seconds or more during digital recording.

Blank Disc

The inserted recordable MD is new, or all tracks on the MD have been erased.

Cannot Edit

A pre-mastered MD is in the deck.

You tried to edit in Program or Shuffle Play mode.

The track is recorded in MDLP mode.

Cannot REC

A pre-mastered MD is in the deck.

The function is switched to MD.

Cannot SYNC!

There is no disc in the MD deck, or the MD is protected against erasure.

There is no time remaining on the MD.

Complete!

The editing operation of the MD is completed.

Disc Full!

There is no time remaining on the MD.

Eject

The MD deck is ejecting the MD.

Group Full!

An attempt was made to create a new group in excess of the maximum number of groups, or there are insufficient characters for updating the group management information.

Impossible

You tried to make an impossible editing operation.

You cannot perform Net MD operations during timer playback.

You cannot combine or erase the tracks due to the system limitations of MDs.

Incomplete!

Adjustment of the recording level after recording or Fade-in and Fade-out procedures have failed since the system was either subject to vibration or there is a damaged or dirty disc in the tray.

Initialize

The power was off for a long time, so the system is initializing itself.

Name Full!

There is no more space to store track, disc or group titles.

No Change

While attempting to change the recording level after recording, you pressed ENTER without actually changing the recording level, so no change was made.

No Disc

There is no disc in the MD deck.

OVER

You have reached the end of the MD while pressing

Mduring pause mode.

Push STOP!

You pressed an invalid button during playback, pause, recording or recording pause.

Reading

The MD deck is reading the TOC information of the MD.

—Rehearsal—

The MD is playing the specified point for confirmation during the A-B Erase Function and the Divide Function (pages 56 and 59).

S.F Edit!

You attempted to perform another operation while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode.

S.F Edit NOW

You pressed ?/1 while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode.

Smart Space

The signal was input again after silence continued for 3 or more but less than 30 seconds during digital recording, and the silence was cut to 3 seconds.

Step Full!

You tried to program 26 or more tracks (steps).

TOC Writing

The MD deck is writing the information of recorded or edited contents.

Track End

You have reached the end of the track while adjusting the dividing point during the Divide Function.

94GB