Releasing all groups on an MD

— All Release Function

You can release all groups on an MD at once.

1 Press MD GROUP repeatedly in stop mode until “GROUP ON” appears.

2 Press MENU/NO.

3 Press . or > repeatedly until “Gp

All REL?” appears, then press ENTER.

“All REL??” appears.

4 Press ENTER.

Erasing recordings

— Erase Function

The MD deck lets you erase unwanted tracks quickly and easily.

You can restore the erased contents using the Undo function immediately after the erasing (page 60). However, you cannot restore the erased contents after performing other editing. Before erasing, make sure if it is all right to erase the content.

The three options for erasing recordings are:

•Erasing a single track (Track Erase Function)

•Erasing all tracks (All Erase Function)

•Erasing a portion of a track (A-B Erase Function)

Erasing a single track

— Track Erase Function

When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered.

Example: Erasing track 2

Track number

 

 

 

 

Erase track 2

 

 

 

 

 

 

 

 

 

1

2

 

3

 

4

Original

 

 

A

 

B

 

C

D

tracks

 

 

After

1

 

2

 

 

3

A

 

 

C

 

D

ERASE

 

 

 

 

 

 

 

 

 

 

 

 

 

As the track numbers are renumbered as above, it is recommended to erase from the latter tracks when erasing several tracks, so as not to change the track numbering of unerased tracks.

1 Press FUNCTION repeatedly to switch the function to MD.

2 Press MENU/NO.

3 Press . or > repeatedly until “Tr

Erase?” appears, then press ENTER.

Playback of the selected track starts.

continued

Editing – MD

55GB