Recording on a tape manually

— Manual Recording

You can record just the portions you like from a disc, MD or radio program on a tape.

You can also record from connected components (see “Hooking up optional components” on page 84).

Use buttons on the MD deck for the operation.

1 Load a recordable tape.

2 Press FUNCTION on the remote repeatedly to select the desired source to record.

•DVD: To record from this system’s DVD player.

•MD: To record from this system’s MD deck.

•TUNER: To record from this system’s tuner.

•TV: To record from the connected TV.

•VIDEO (SAT): To record from the connected optional component.

3 Press REC.

The tape deck stands by for recording.

4 Press DIRECTION repeatedly to select “g” to record on one side. Select “h” (or “j”) to record on both sides.

5 Move TAPE lever to nN repeatedly to select recording side.

If you select both sides recording or front side recording, move TAPE lever to nN to light up the N indicator. If you record on the reverse side, move TAPE lever to nN again to light up the n indicator.

6 Press X, then start playing the desired source to record.

Recording starts.

Other operations

To

Do this

Stop recording

Move TAPE lever to x.

 

 

Pause recording

Press X.

 

 

Note

When you record from a Super Audio CD with multi- channel sound, only the sound from the front L/R speakers is recorded.

Tip

If noise is heard while recording from the tuner, move the respective antenna to reduce the noise.

68GB