Tape – Recording

Recording your favorite CD/MD tracks on a tape

— CD/MD-TAPE Synchro Recording

You can record a whole CD or MD on a tape. You can use TYPE I (normal) tape.

Use buttons on the MD deck for the operation.

1 Load a recordable tape.

2 Load a CD or MD you want to record.

3 Press MODE repeatedly until “CDtTAPE SYNC” or “MDtTAPE

SYNC” appears.

4 Press ENTER/START.

“Press START” flashes. The tape deck stands by for recording and the DVD player or MD deck pauses for play.

5 Press DIRECTION repeatedly until “g” appears to record on one side or “h” (or “j”) to record on both sides.

6 Move TAPE lever to nN to select recording side.

If you select both sides recording or front side recording, move TAPE lever to nN to light up the N indicator. If you record on the reverse side, move TAPE lever to nN again to light up the n indicator.

7 Press ENTER/START while “Press START” flashes.

Recording starts.

When the recording is completed, the DVD player or MD deck, and the tape deck stop automatically.

To stop recording

Move TAPE lever to x.

To record a CD or MD by specifying track order

You can record only your favorite CD or MD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of “Creating your own program” (page 21) or “Programming MD tracks” (page 39).

Notes

•CD Synchro Recording is not available with DVDs and JPEG files.

•You cannot listen to other sources while recording.

•If the CD or MD play mode is set to Repeat Play or Shuffle Play, it automatically switches to Normal Play in step 4.

•When you record from a Super Audio CD with multi- channel sound, only the sound from the front L/R speakers is recorded.

Tip

If you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the

reverse side. Tape–

– Play/Tape

Recording

67GB