1 Press FUNCTION repeatedly to switch the function to MD.
2
3 Press . or > repeatedly until “Setup?” appears, then press ENTER.
4 Press . or > repeatedly until “S.Space Off” (or “S.Space On”) appears, then press ENTER.
5 Press . or > repeatedly until “S.Space On” appears, then press
ENTER.
6 Press MENU/NO.
To continue recording, follow the procedures described for each type of recording.
To turn off the Smart Space Function
In step 5, press . or > repeatedly until “S.Space Off” appears, then press ENTER.
Adjusting the recording level
When recording on an MD, you can adjust the recording level to the desired volume. You can adjust the recording level not only when making an analog recording, but also when making a digital recording from a CD, etc.
1 | Press FUNCTION repeatedly to select |
| |
2 | the desired source to record. |
| |
| |||
Press REC/REC IT on the MD deck. |
| ||
3 | The MD deck stands by for recording. | ||
| |||
Start playing the desired source to | Recording | ||
4 | record. | ||
| |||
Press MENU/NO to display “Setup?”, |
| ||
5 | then press ENTER. |
| |
Press . or > repeatedly until |
| ||
| “LevelAdjust?” appears, then press |
| |
6 | ENTER. |
| |
Press . or > repeatedly to adjust |
| ||
| the recording level. |
|
Adjust to the optimum level while making sure that “OVER” does not appear in the display at the loudest portion.
Adjust the level so as not to light up “OVER”.
7 Press ENTER.
8 Press MENU/NO.
9 Stop playing the sound source.
The MD deck stops.
To continue recording, follow the procedures described for each type of recording.
Tips
•You can also adjust the recording level during recording.
•Once adjusted, the recording level is maintained until you adjust it again.
•You cannot adjust the recording level during CD- MD Synchro Recording.
49GB