Timer recording radio programs
You can record a preset radio station from a specified time.
To timer record, you must first preset the radio station (see “Presetting radio stations” on page 62) and set the clock (see “Setting the clock” on page 12).
1 Tune in the preset radio station (see “Listening to a preset station” on page 63).
2 Press CLOCK/TIMER SET.
3 Press . or > repeatedly to select “REC SET?”, then press ENTER.
4 Press . or > repeatedly until the timer number (e.g., “REC 1”) you want to set appears, then press ENTER.
5 Press . or > repeatedly until the desired type of timer appears.
•ONCE?: The timer activates only once.
•DAILY?: The timer activates at the same time every day.
•WEEKLY?: The timer activates at the same time on the set day of every week.
6 Press ENTER.
When you select “ONCE?” or “WEEKLY?” in step 5, the day of the week indication flashes.
Proceed to step 9 when you select “DAILY?” in step 5.
7 Press . or > repeatedly to set the day of the week that the timer activates.
8 Press ENTER.
The hour indication flashes.
9 Set the time to start recording.
Press . or > repeatedly to set the hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the minute, then press ENTER.
10 Set the time to stop recording following the same procedure as step 7 to 9.
11 Press . or > repeatedly to select “MD” or “TAPE”, then press ENTER.
12 When you record on an MD, press . or > repeatedly to select the recording mode (e.g., “LP2”), then press ENTER.
The timer recording settings appear, then the original display returns.
13 Load a recordable MD or tape.
14 Press ?/1 to turn off the system.
Other operations
To | Do this | |
Check the setting | 1 | Press CLOCK/TIMER |
|
| SELECT. |
| 2 | Press . or > |
|
| repeatedly until “TIMER |
|
| SELECT?” appears, then |
|
| press ENTER. |
| 3 | Press m or M repeatedly |
|
| until the timer number (e.g., |
|
| “REC 1”) you want to check |
|
| appears, then press ENTER. |
|
| |
Change the setting | Start over from step 1. | |
|
|
|
Active/cancel the | 1 | Press m or M repeatedly |
timer |
| to display the timer number |
|
| (e.g., “REC 1”) you want to |
|
| active/cancel in step 3 of |
|
| |
| 2 | Press . or > |
|
| repeatedly to select the timer |
number (active the timer) or “ －” (cancel the timer), then press ENTER.
If the timer is not set, “ · ” appears.
74GB