Sony CMT-SE9 Listening to audio from a connected component, Recording audio from a connected component, Listening to an analog component (such as a VCR)

Listening to audio from a connected component

Listening to a digital component (such as a satellite tuner)

1 Connect an optical cable.

See “Hooking up optional components” on page 84.

2 Press FUNCTION repeatedly until “VIDEO” appears.

3 Press MENU/NO repeatedly until “SAT?” appears, then press ENTER.

Start playing the connected component.

Listening to an analog component (such as a VCR)

1 Connect the audio cords.

See “Hooking up optional components” on page 84.

2 Press FUNCTION repeatedly until “VIDEO” appears.

Start playing the connected component.

Tip

When the component is connected using an optical digital cable and audio/video cords, the audio from the VIDEO/SAT DIGITAL IN OPTICAL jack has priority.

Recording audio from a connected component

Making a digital recording from a digital component

The Serial Copy Management System (page 99) may prevent you from making a digital recording of certain material. In this case, connect the component to VIDEO/SAT IN jacks and make an analog recording.

In addition, you cannot make a digital recording of sound encoded by other than PCM mode. Set optional digital components to PCM output.

1 Connect the digital optical cable.

See “Hooking up optional components” on page 84.

2 Start recording manually.

See “Recording on an MD manually” (page 45).

Note

When Smart Space/Auto Cut is set to on, the recording pauses if no sound continues for 30 seconds or more (page 48).

Tips

•You can activate Time Machine Recording (page 46).

•You can adjust the recording level when recording on an MD (page 49).

Components Optional

continued

85GB