About recording errors

•With the following kinds of discs, you may experience a reading failure or noise when recorded on an MD:

–Discs with adhesive labels attached to them

–Irregularly shaped discs (for example, heart- or star-shaped)

–Discs with printed text concentrated on one side only

–Scratched discs

–Dirty discs

–Warped discs

•If the following occurs during CD playback or recording, a reading error may occur or noise may be produced in the recorded results:

–The system is bumped.

–The system is placed on an uneven or soft surface.

–The system is located near a speaker, door, or other source of vibration.

•If the above reading errors occur, an extra soundless track may be created. You can erase these extra tracks using Erase Function (page 55).

*1 For details on the limitations of digital recording, see “Guide to the Serial Copy Management System” on page 99. If you do not connect the DVD player to MD deck with the supplied digital optical cable, the MD deck only performs analog recording.

*2 You cannot make a digital recording of sound encoded by other than PCM mode. Set optional digital components to PCM output.

*3 Even if you connect a digital component, the MD deck performs analog recording.

*4 TOC: Table Of Contents

After recording

Press Z MD on the MD deck to remove the MD or press ?/1 (power) to turn off the system.

“TOC” starts flashing. The TOC is updated and recording is completed.

Before pulling out the mains lead

MD recording is completed when the MD Table of Contents (TOC) is updated. The TOC is updated when you eject the MD or press ?/1 to turn off the system. Do not pull out the mains lead before updating the TOC or while updating the TOC (while “TOC” lights up or flashes) to ensure a complete recording.

Protecting a recorded MD

•To protect a recorded MD, slide the tab on the side of the MD to open the slot. In this position, the MD cannot be recorded. To record on the MD, slide the tab to close the slot.

Tab

Slide the tab

•If the MD is record protected, “C11” and “Protected” appear alternately and the MD cannot be recorded. Remove the MD, then slide the record protection tab to the closed position.

42GB