— Manual Tuning
1 Press TUNER BAND repeatedly (or move TUNER lever on the DVD player to FM or AM) to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until both “AUTO” and “PRESET” disappear.
3 Press + or – on the remote repeatedly to tune in the desired station.
Tips
•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
•When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve.
•Press TUNING MODE repeatedly until “AUTO” appears in step 2 above, then press + or – on the remote. The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).
•To record the radio programs, use manual recording (pages 45 and 68).
•You can switch from another source to the tuner by pressing TUNER BAND (Automatic Source Selection). However, while the Net MD function is on, you cannot switch the function.
Labelling the preset stations
— Station Name
You can label each preset station with up to 10 characters (Station Name).
1 Tune in the station you want to label (see “Listening to the radio” on page 63).
2 Press NAME EDIT/SELECT.
The cursor starts flashing.
Cursor
3 Perform steps 3 to 6 of “Labelling an MD/group/track” (page 52).
To cancel labelling
Press MENU/NO.
To erase the station name
1Tune in the preset station you want to erase the station name.
2Press NAME EDIT/SELECT.
3Press CLEAR repeatedly to erase the name.
4Press ENTER.
Note
When you tune in a station that provides RDS services, the station name is overwritten.
64GB