In step 6, press . or > repeatedly to select the number of the first track you want to register, then press ENTER.
When registering only one track, press ENTER again.
When registering two or more tracks, press . or > repeatedly to select the number of the last track you want to register, then press
ENTER.
Notes
•You cannot register the same track to more than one group.
•If you do not enter a group title in step 5, “Group ** (group number)” appears as the group title.
Tip
You can also register tracks that were recorded on a system that does not support the Group Function.
Releasing group registrations
— Release Function
These functions allow you to release group registrations simply by specifying the group for which you want to release the registrations. In addition, you can also release the registrations of all groups on an MD at once.
For details on the group management information, see “Registering tracks in groups” on page 50.
Releasing a single group— Group Release Function
You can release a specified group and erase that group. (However, note that the tracks are not erased.)
1 Press FUNCTION repeatedly to switch the function to MD.
2 Press MD GROUP repeatedly until “GROUP ON” appears.
3 Press GROUP SKIP repeatedly until the desired group appears.
4 Press MENU/NO.
5 Press . or > repeatedly until “Gp
Release?” appears, then press ENTER.
“REL Gp** (selected group number)??” appears.
6 Press ENTER.
54GB