8 Press ENTER.
“S.F Edit OK?” appears.
9 Press ENTER again.
The system starts recording over the existing track.
“S.F Edit: ** %” appears while the track is being recorded. An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. When the recording finishes, “Complete!” appears.
1 Press FUNCTION repeatedly to switch the function to MD.
2 Press PLAY MODE in stop mode repeatedly until both “SHUF” and “PGM” disappear.
3 Press MENU/NO.
4 Press . or > repeatedly until “S.F
Edit?” appears, then press ENTER.
5 Press . or > repeatedly until “Fade In?” or “Fade Out?” appears, then press ENTER.
Playback starts.
6 Press . or > repeatedly until the track number you want to change the recording level appears, then press
ENTER.
“Time5.0s” appears.
7 While monitoring the sound, press . or > repeatedly to change the Fade- in or
The system plays the portion that will be recorded over using
8 Press ENTER.
“S.F Edit OK?” appears.
9 Press ENTER again.
The system starts recording over the existing track.
“S.F Edit: ** %” appears while the track is being recorded. When the recording finishes, “Complete!” appears.
To cancel the operation
Press MENU/NO during step 4 through 8. After pressing ENTER in step 9 to start recording, you cannot interrupt the operation.
Notes
•Do not disconnect the mains lead or move the system while recording is in progress. This may damage the recording data preventing recording from being performed properly.
•You cannot change the recording level of the tracks recorded in MDLP mode.
•Repeatedly changing the recording level results in poor sound quality.
•The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level.
•The recording level cannot be changed while the timer is activated.
•You cannot undo the S.F Edit Function even if you use the Undo Function.
Editing – MD
61GB