Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute display (the
AUTO* t 90MIN t 80MIN t 70MIN
t… t 10MIN t SLEEP OFF
*The system automatically turns off in 240 minutes or after the current disc, MD or tape finishes playing.
Other operations
To | Press |
Check the | SLEEP once. |
remaining time** |
|
|
|
Change the time | SLEEP repeatedly to select the |
to turn off | time you want. |
|
|
Cancel the Sleep | SLEEP repeatedly until “SLEEP |
Timer Function | OFF” appears. |
|
|
**You cannot check the remaining time if you select “AUTO”.
Notes
•You cannot turn off the TV power using the Sleep Timer.
•Do not set to “AUTO” during Synchro Recording on an MD or a tape.
•You cannot use the Sleep Timer while the Net MD function is on.
•During S.F Edit operation, the system does not turn off automatically even when the designated time has elapsed. The system turns off after the S.F Edit operation finishes.
Tip
You can use the Sleep Timer, even if you have not set the clock.
72GB
Waking up to music
— Play Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 12).
1 Prepare the sound source you want to play.
•DVD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 21).
•MD: Load a MD. To start from a specific track, make a program (see “Programming MD tracks” on page 39).
•Tape: Load a tape.
•Tuner: Tune in the preset radio station (see “Listening to the radio” on page 63).
2 Press VOLUME + or – (or turn VOLUME control on the DVD player) to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly to select
“PLAY SET?”, then press ENTER.
5 Press . or > repeatedly until the desired type of timer appears.
•PLAY ONCE?: The timer activates only once.
•PLAY DAILY?: The timer activates at the same time every day.
•PLAY WEEKLY?: The timer activates at the same time on the set day of every week.
6 Press ENTER.
When you select “PLAY ONCE?” or “PLAY WEEKLY?” in step 5, the day of the week indication flashes.
Proceed to step 9 when you select “PLAY DAILY?” in step 5.
7 Press . or > repeatedly to set the day of the week that the timer activates.
8 Press ENTER.
The hour indication flashes.