Types of trouble and their solutions
OthersSymptom | Cause and/or Corrective Actions |
The Remote Commander supplied | • COMMANDER is set to OFF in the menu settings. |
with your camcorder does not work. | c Set it to ON. (p. 91) |
| • Something is blocking the infrared rays. |
| c Remove the obstacle. |
| • The batteries are inserted in the battery holder with the |
| + – polarities incorrectly matching the + – marks. |
| c Insert the batteries with the correct polarity. (p. 134) |
| • The batteries are dead. |
| c Insert new ones. (p. 134) |
The melody or beep sounds for 5 seconds.
• Moisture condensation has occurred.
cRemove the cassette and leave your camcorder for at least 1 hour to acclimatize. (p. 118)
•Some troubles have occurred in your camcorder.
cRemove the cassette and insert it again, then operate your camcorder.
No funciton works though the power is on.
•Disconnect the power code of the AC power adaptor or remove the battery pack, then reconnect it in about 1 minute. Turn the power on (p. 14, 18). If the functions still do not work, press the RESET button using a
While charging the battery pack, the CHG lamp does not light up.
•The AC power adaptor is disconnected. c Connect it firmly. (p. 15)
•Charging has been completed.
•The battery pack is not installed properly. c Install the battery pack properly. (p. 14)
•Something is wrong with the battery pack.
cContact your Sony dealer or local authorized Sony service facility.
While charging the battery pack, the CHG lamp flashes.
• Something is wrong with the battery pack.
cContact your Sony dealer or local authorized Sony Service facility.
You cannot charge the battery pack | • The POWER switch is not set to OFF (CHARGE). |
installed to your camcorder. | c Set it to OFF (CHARGE). |
The power goes off although the | • A deviation has occurred in the remaining battery time. |
remaining battery time indicator | c Charge the battery pack fully again (p. 15) |
indicates that the battery pack has |
|
enough power to operate. |
|
|
|
100