Sony DSR-DR1000 Input connectors, Audio performance, Output connectors

SC: ±180°

*Adjust with menu settings.

**Adjust with controls on the front panel.

Audio performance

Frequency response

Two-channel (48 kHz) mode: 20 Hz to 20 kHz ±1.0 dB Four-channel (32 kHz) mode:

20 Hz to 14.5 kHz ±1.0 dB

Dynamic range More than 87 dB Distortion (THD + N)

Less than 0.07% (48 kHz)

Input connectors

Digital signal inputs

SDI IN BNC type

SDI format (270 Mbps), SMPTE 259M/ CCIR656-III

AUDIO (AES/EBU) IN

BNC type (×2), complying with AES- 3id-1995

S400(i.LINK) 6-pin, complied with IEEE 1394

Analog video inputs

REF. VIDEO IN

	BNC type (×2, loop-through with 75 Ω
	automatic terminator)
	Black burst
	0.286 V (DSR-DR1000) or 0.3 V
	(DSR-DR1000P), 75 Ω , negative sync
	Composite sync
VIDEO IN	BNC type (×3 and 1 loop-through
	connector with 75 Ω automatic
	terminator), composite/component/S-
	video switchable
Composite	Y/CPST and 1 loop-through connector
	with 75 Ω automatic terminator: 1.0
	Vp-p, 75 Ω , sync negative
Component	Y/CPST: 1.0 Vp-p, 75 Ω , negative sync
	R−Y/S−C and B−Y/S−Y: 0.7 Vp-p (75%
	color bars for DSR-DR1000 or 100%
	color bars for DSR-DR1000P), 75 Ω
S-video	Y/CPST: 1.0 Vp-p, 75 Ω , negative sync
	R−Y/S−C: 0.286 Vp-p (DSR-DR1000)
	or 0.3 Vp-p (DSR-DR1000P), 75 Ω
	(burst level)
Analog audio inputs
AUDIO IN	XLR 3-pin, female (×2), +4/0/ −3*/−6

dBm, high impedance, balanced

* For DSR-DR1000 only

Time code input

TIME CODE IN

BNC type, SMPTE time code (DSR- DR1000) or EBU time code (DSR-

DR1000P), 0.5 Vp-p to 18 Vp-p, 3.3 kΩ , unbalanced

Network 100BASE-TX/10BASE-T

RJ-45 type

100BASE-TX: complied with IEEE 802.3u

10BASE-T: complied with IEEE 802.3

Output connectors

Digital signal outputs

SDI OUT BNC type (×2)

SDI format (270 Mbps), SMPTE 259M/ CCIR656-III

AUDIO (AES/EBU) OUT

BNC type (×2), complying with AES- 3id-1995

S400(i.LINK) 6-pin, complied with IEEE 1394

Analog video outputs

VIDEO OUT	BNC type (×3), composite/component/
	S-video switchable
Composite	Y/CPST, and SUPER: 1.0 Vp-p, 75 Ω ,
	sync negative
Component	Y/CPST: 1.0 Vp-p, 75 Ω , negative sync
	R−Y/S−C and B−Y/S−Y: 0.7 Vp-p (75%
	color bars for DSR-DR1000 or 100%
	color bars for DSR-DR1000P), 75 Ω
S-video	B−Y/S−Y: 1.0 Vp-p, 75 Ω , negative sync
	R−Y/S−C: 0.286 Vp-p (DSR-DR1000)
	or 0.3 Vp-p (DSR-DR1000P), 75 Ω
	(burst level)
Analog audio outputs
AUDIO OUT	XLR 3-pin, male (×2), +4/0/ −3*/−6 dBm,
	600 Ω loading, low impedance,
	balanced
MONITOR	Phono jack, −11∗∗ dBu (DSR-DR1000)/

−9∗∗ dBu (DSR-DR1000P) ±1 dB, 47 kΩ , unbalanced, −20 dBFS (DSR- DR1000)/−18 dBFS (DSR-1000P)

*For DSR-DR1000P only

**With the PHONES control knob at the center position

102 Specifications