14 To set point B, refer to steps 5 to 13. (Select “REPEAT END” in step 5, “B POINT” in step 7, and “B PRESET” in step 9.)
15 Press the MENU button to close the menu.
Repeat Playback —Automatic Cyclical Playback
Proceed as follows to perform automatic cyclical playback of recording (repeat playback) between selected start and end points.
1 Set the desired repeat start and end points with the REPEAT FUNCTION menu item (see page 64).
You can set points A and B as start and end points by following the procedure described in “Setting Points A and B for Repeat Playback” on page 39.
2 Set the REPEAT MODE menu item (see page 64) to ON.
The REPEAT indicator lights.
3 Press the SET button to save the new setting and close the menu.
4 Press the PLAY button.
The unit repeats playback between the repeat start and end points set in step 1.
Connecting Multiple Units for Simultaneous Playback (Multi-Simultaneous
Playback)
You can connect multiple
case, the REMOTE I/F menu item (see page 72) must be set to 9PIN(PARA).
To control all of the cascaded units from a single unit, press the EXT button on the controlling unit, turning it on. Set the control mode selectors on other units to REMOTE.
Monitor |
|
| Monitor |
SUPER a) | a) MONITOR | SUPER a) | a) MONITOR |
Recorder 1 | Recorder 2 | |
(controlling unit) | ||
|
REMOTE OUT(P) | REMOTE OUT(P) |
b)REMOTE IN(R)
b)
a) 75 Ω coaxial cable | Recorder n | |
b) | ||
|
Monitor
42 Playback