Note
When controlling this unit from external equipment, set the REMOTE I/F menu item (see page 72) and the Control mode selector so that the remote mode indicators in the display section are on or off as follows.
•When using an editing control unit connected to the REMOTE IN (R) connector:
Switch/menu item | Setting |
|
|
Control mode selector | REMOTE |
| (REMOTE indicator lights.) |
|
|
REMOTE I/F menu item | 9PIN |
| (9P indicator lights.) |
|
|
•When using an
Switch/menu item | Setting |
|
|
Control mode selector | LOCAL |
|
|
REMOTE I/F menu item | — |
|
|
•When using equipment connected to the 
S400(i.LINK) connector:
Switch/menu item | Setting |
|
|
Control mode selector | REMOTE |
| (REMOTE indicator lights.) |
|
|
REMOTE I/F menu item | i.LINK |
| (i.LINK indicator lights.) |
|
|
For description on how to carry out search operations via external equipment, see the operating instructions for the equipment.
Cueing Up a Desired Cue Point
When you have started this unit, the cue pointer is automatically positioned at the top of the disk (or the start point of the
When you press the NEXT button with the J (CUE) button held down, the cue pointer jumps to the first- registered cue point. A second press of the NEXT button
with the J (CUE) button held down makes the cue pointer jump to the
When you press the PREV button with the J (CUE) button held down, the cue pointer jumps to the previous cue point.
Clip 1 | Clip 2 | Clip 3 |
|
|
|
ADBC
Top of disk: The initial position of the cue pointer when you have started the unit.
A:
B:
C:
D:
If cue points are registered as shown in the above figure, pressing the NEXT button repeatedly with the J (CUE) button held down makes the cue pointer jump in the order
ARBRCRD.
To jump back from point D to point B for example, press the PREV button twice with the J (CUE) button held down.
44 Playback