aREC (record) indicator Lights during recording.
bREC (record) button
When you press this button while holding down the PLAY button, it lights and recording begins.
Note
When the control mode selector is set to REMOTE (the REMOTE indicator is lit), no recording/playcack control buttons other than the STOP button will work. This can be changed with the LOCAL ENABLE menu item (see page 65).
cPREV (previous) button
When pressed once, moves to the start point of the clip containing the current position. When pressed a second time, moves to the start point of the previous clip.
Pressing the PREV button with the PLAY button held down allows you to view fast reverse playback. However, to do this, you need to set the F. FWD/REW menu item under the AUTO EE SELECT menu item (see page 64) to PB.
If cue points are set (see page 36), the PREV button is used to cue up a cue point (see page 44).
dPLAY button
When you press this button, it lights and playback begins. If you press this button during recording, the recording operation is stopped and this unit enters playback mode.
eNEXT button
When pressed once, moves to the start point of the next clip. However, when this button is pressed while in the last clip, it moves to the end point of that clip.
Pressing the NEXT button with the PLAY button held down allows you to view fast forward playback. However, to do this, you need to set the F. FWD/REW menu item under the AUTO EE SELECT menu item (see page 64) to PB.
If cue points are set (see page 36), the NEXT button is used to cue up a cue point (see page 44).
fSTOP button
Press this button to stop the recording or playback operation.
5PANEL SELECT sectionNote
The buttons of the PANEL SELECT section cannot be turned on or off during simultaneous recording and playback.
PANEL SELECT
RP EXT
3 EXT button
2 P button
1 R button
aR (recorder) button
Press this button, turning it on, to put the control panel of the unit into a state in which the only operations possible are recording operations. The buttons which function in this state are the REC button, PLAY button (only when pressed at the same time as the REC button), and the STOP button.
bP (player) button
Press this button, turning it on, to put the control panel of the unit into a state in which the only operations possible are playback operations. The REC button and PLAY button do not function, even if pressed at the same time.
cEXT (external) button
When you have connected multiple
You can connect multiple
1 MENU button
2RESET button
MENU RESET SET
3 SET button
CUE
INOUT
4 Cursor/clip operation buttons
Location and Function of Parts | 21 |
|
|